Kabel Nickel Murni 0.04mm (Ni200 Ni201) Ora NO2201
Kabel Nickel Murni (Ni200 Ni201) Ora NO2201 0.025mm
| Kelas Nikel | Ni + co | Cu | Si | Mn | C | Cr | S | Fe | Mg |
| ≥ | ≤ | ||||||||
| Ni201 | Bal. | .25 | .3 | .35 | .02 | .2 | .01 | .3 | - |
| Ni200 | Bal. | .25 | .3 | .35 | .15 | .2 | .01 | .3 | - |
Jalur nikel
Karakteristik lan aplikasi saka jalur nikel
1) kekarepan listrik sing dhuwur
2) Ketahanan listrik sing kurang
3) Kahanan sing apik banget lan Slit Edge
4) Meningkat solderability minangka akibat saka oksida ndhuwur
5) KOMUNITAS sing apik banget karo karakteristik Draws jero kanthi suda mati
6) Rintangan kanggo wutah gandum
7) Baterei sing bisa diisi ulang (nikel logam hydride, ion litium), stamping metal, 8) pigura, gasket lan segel, aplikasi lampu, aplikasi superconduktor
Toleransi Dimensi Strip Nikel
| Kekandelan (MM) | Toleransi kekandelan | Burr Dhuwur | Widget Toleransi (MM) | |||||
| 2w <10 | 10W <50 | 50ºW <100 | 100ºW <150 | 150ºW <200 | 200W ≤500 | |||
| 0.02≤t <0,05 | +0.002, -0.003 | ≤0.005 | ± 0,05 | ± 0,10 | ± 0.15 | ± 0,20 | ± 0,30 | ± 0,50 |
| 0,05≤t <0.1 | ± 0,005 | ≤0.01 | ||||||
| 0.1≤t <0.2 | ± 0,008 | ≤0.015 | ||||||
| 0.2≤t <0.3 | ± 0,012 | ≤0.02 | ||||||
| 0.3≤t <0.4 | ± 0,015 | ≤0.03 | ± 0,10 | ± 0.15 | ± 0,25 | ± 0,50 | ± 0,80 | ± 1.00 |
| 0.4≤t <0.6 | ± 0,025 | ≤0.05 | ||||||
| 0.6≤t <0,8 | ± 0,030 | ≤0.06 | ± 0,30 | ± 0,40 | ± 0,50 | ± 0,50 | ± 0,80 | ± 1.00 |
| 0.8≤t <1.0 | ± 0,040 | |||||||
| 1.0≤t <1.2 | ± 0,050 | ≤0.08 | ± 0,50 | ± 0,50 | ± 0,80 | ± 1.00 | ± 1.00 | ± 1,50 |
| 1.2≤t <1.4 | ± 0,060 | |||||||
| 1.4≤t <1.7 | ± 0,070 | ≤0.10 | ||||||
| 1.7≤t <2.0 | ± 0,080 | |||||||
Aplikasi saka Kawat Nickel
Aparat Eecaratus lan Mesin Kimia, Pangkalan Filter Filter, Komponen Intine saka Vacuum Katek, Komponen Tubes, Mimpin
kawat, nyengkuyung kabel, produksi baterei, lapisan vakum, elektrodes sparkling, lan panukir panas
Shanghai Takiii Alloy Material Co, Ltd wis spesialisasi ing produksi NI-NI Alloy, Fechral, Wire Thermocouple,nikel murniLan bahan aloi presisi liyane ing bentuk kawat, jalur, rod, bar lan piring.
Ukuran lan toleransi (MM)
| Diameteripun | 0,025-0.03 | > 0.03-0.10 | > 0.10-0.40 | > 0.40-0.80 | > 0.80-1.20 | > 1.20-2.00 |
| Toleransi | ± 0,0025 | ± 0,005 | ± 0,006 | ± 0,013 | ± 0,02 | ± 0,03 |
