Nichrome Enamel / Konstantan / Tembaga / Lizt / Kawat Warna / Perak / Kawat Putar
Deskripsi Produk
Kabel resistensi enamel iki umume digunakake kanggo resistor standar, mobil
bagean, resistor nduwurke tumpukan, etc nggunakake Processing jampel paling cocog kanggo aplikasi iki, njupuk kauntungan saka fitur khusu saka lapisan lapisan untu kang atos.
Salajengipun, kita bakal nindakake insulasi lapisan lapisan untu kang atos saka kabel logam larang regane kayata kabel salaka lan platinum marang pesenan. Mangga nggunakake produksi-on-order iki.
Tipe Kawat Nichrome
NiCr80/20,NiCr70/30,NiCr60/15,NiCr90/10,NiCr35/20,NiCr30/20
Tipe Isolasi
| Jeneng insulasi-enamel | Tingkat TermalºC (wektu kerja 2000h) | Jeneng Kode | Kode GB | ANSI. JENIS |
| Kawat enamel poliuretan | 130 | UEW | QA | MW75C |
| Kawat enamel poliester | 155 | PEW | QZ | MW5C |
| Kawat enamel poliester-imida | 180 | EIW | QZY | MW30C |
| Polyester-imide lan polyamide-imide dilapisi kaping pindhokawat enamel | 200 | EIWH (DFWF) | QZY/XY | MW35C |
| Kawat enamel poliamida-imida | 220 | AIW | QXY | MW81C |
Tipe Bare Alloy Wire
Paduan sing bisa kita lakoni yaiku kawat tembaga-nikel paduan, kawat Konstantan, kawat Manganin. Kama Wire, NiCr Alloy wire, FeCrAl Alloy wire etc alloy wire
| utama properti jinis | Cuni1 | CuNI2 | CuNI6 | CuNi8 | CuNI10 | CuNi19 | CuNi23 | CuNi30 | CuNi34 | CuNI44 | |
| utama kimia komposisi | Ni | 1 | 2 | 6 | 8 | 10 | 19 | 23 | 30 | 34 | 44 |
| MN | / | / | / | / | / | 0.5 | 0.5 | 1.0 | 1.0 | 1.0 | |
| CU | ngaso | ngaso | ngaso | ngaso | ngaso | ngaso | ngaso | ngaso | ngaso | ngaso | |
| maks nyambut gawe suhu | / | 200 | 220 | 250 | 250 | 300 | 300 | 350 | 350 | 400 | |
| kapadhetan g/cm3 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | |
| resistivitas ing 20 ° c | 0.03 ± 10% | 0,05± 10% | 0.10± 10% | 0,12± 10% | 0,15± 10% | 0,25± 5% | 0.30± 5% | 0,35± 5% | 0.40± 5% | 0,49± 5% | |
| suhu koefisien saka resistance | <100 | <120 | <60 | <57 | <50 | <25 | <16 | <10 | -0 | <-6 | |
| tensile kekuatan mpa | > 210 | > 220 | > 250 | > 270 | > 290 | >340 | > 350 | > 400 | > 400 | >420 | |
| elongation | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | |
| lebur titik °c | 1085 | 1090 | 1095 | 1097 | 1100 | 1135 | 1150 | 1170 | 1180 | 1280 | |
| koefisien saka konduktivitas | 145 | 130 | 92 | 75 | 59 | 38 | 33 | 27 | 25 | 23 |
kabel pemanas nicr8020 alloy
1. Babagan kabel Nichrome
Paduan nichrome kalebu nikel murni, paduan NiCr, paduan Fe-Cr-Al lan paduan nikel tembaga.
Paduan krom nikel: Ni80Cr20, Ni70Cr30, Ni60Cr15, Ni35Cr20, Ni30Cr20, Cr25Ni20, nikel murni Ni200 lan Ni201
2. Kauntungan utama lan Aplikasi
1. Nikel-kromium, nikel-kromium alloy karo resistance dhuwur lan stabil, resistance karat, resistance oksidasi lumahing apik, sing luwih apik ing suhu dhuwur lan kekuatan seismik, ductility apik, workability apik lan weldability.
2.Produk kita akeh ditrapake kanggo industri kimia, mekanisme metalurgi, industri kaca, industri keramik, area peralatan omah lan liya-liyane.
1) Komposisi kimia:
| Merk | Komposisi kimia | Si | Cr | Ni | Al | Fe | |||
| C | P | S | Mn | ||||||
| Ora luwih saka | |||||||||
| Cr20Ni80 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 20.0-23.0 | tetep | ≤0,50 | ≤1.0 |
| Cr15Ni60 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 15.0-18.0 | 55.0-61.0 | ≤0,50 | tetep |
| Cr20Ni35 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-3.00 | 18.0-21.0 | 34.0-37.0 | - | tetep |
| Cr20Ni30 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-2.00 | 18.0-21.0 | 30.0-34.0 | - | tetep |
2) Ukuran lan Toleransi
Nalika produk ing status "M", kudu mèlu GB standar / T1234-1995
1) Resistivitas:
| Merk | Cr20Ni80 | Cr20Ni60 | Cr20Ni35 | Cr20Ni30 | ||
| Dhiameter mm | <0.50 | 0.50-3.0 | <0.50 | ≥0.50 | <0.50 | ≥0.50 |
| resistivitas (20°C)uΩ·m | 1.09±0.05 | 1.13±0.05 | 1.12±0.05 | 1.15±0.05 | 1.04±0.05 | 1.06±0.05 |
