1.1mm Soft Magnetic Alloy FeNi50 Wire kanggo Chokes
1.1mm Soft Magnetik alloy1J50Kawat kanggo Chokes
| jeneng item | 1.1mm Soft Magnetik alloy1J50Kawat kanggo Chokes |
| Konduktor | 1J50 |
| Item No | 50W11B |
| kahanan | Padhang, alus |
| ukuran | 1,1 mm |
| Kapadhetan | 8,25 g/cm3 |
| dawa | 1052m/kg |
| Bobot | kira-kira 20kg / coil |
| Paket | kasus kayu |
| Standar | GB / T 15018-1194 |
Kanggo 1J50, padha karo ing negara liyaNi50, Paduan 50,E11a, 50H, Hy-Ra49, PB, UNS N14052, ASTM F30, DIN 2.4478, ASTM 753-2 alloy 2
Alloy leleh ing medium vakum, matak menyang ingots, sawise panas forging blanks digawe saka sheet metal, lan banjur sawise rolling panas, pickling, perawatan lumahing, Rolling kadhemen menyang produk rampung.
1J50Paduan wesi-nikel (kira-kira 50% nikel lan 48% isi wesi) yaiku paduan magnetik alus kanthi permeabilitas magnetik dhuwur lan induksi magnetik jenuh dhuwur.
Aplikasi 1J50:
Utamane digunakake ing macem-macem trafo, relay, cengkeraman elektromagnetik, keselak lan inti bagean sirkuit magnetik, sepatu kutub, diafragma earphone, pemutus sirkuit bocor bumi, bagean relay kanggo pemutus sirkuit bocor bumi, katup safety gas, tameng magnet sing digunakake ing medan magnet medium. , Giroskop, motor sinkronisasi otomatis, motor mikro jam tangan elektronik.
Komposisi kimia%
| C | Mn | Si | P | S | Ni | Cu | Fe |
| ≤0.03 | 0.3-0.6 | 0.15-0.3 | ≤0.02 | ≤0.02 | 49.0-51.0 | ≤0.2 | Bal. |
Sifat mekanik ing status anil (20ºC)
| Kekuwatan Tarik (Mpa) | Elongasi (%) | Kekerasan (HV) |
| ≥530 | ≥35 | ≤155 |
Sifat fisik
| Kapadhetan (g/cm3) | 8.25 |
| Titik lebur (ºC) | 1395-1425 |
| Resistivitas listrik ing 20ºC | 0.45 |
| Koefisien magnetostriksi saturasi λθ/ 10-6 | 25 |
| Titik Curie Tc/ºC | 500 |
| Koefisien ekspansi linier(20ºC~200ºC)X10-6/ºC | ||||||
| sasmita | 20-100ºC | 20-200ºC | 20-300ºC | 20-400ºC | 20-500ºC | 20-600ºC |
| 1J50 | 8.9 | 9.27 | 9.2 | 9.2 | 9.4 | |
| Sifat magnetik saka wesi kanthi permeabilitas dhuwur ing lapangan sing lemah | |||||||
| 1J50 | permeabilitas awal | permeabilitas maksimum | Coercivity | Intensitas induksi magnetik saturasi | |||
| Сstrip/lembaran lawas. Ketebalan, mm | μ0.08/ (mH/m) | μm/ (mH/m) | Hc/ (A/m) | BS/ T | |||
| ≥ | ≤ | ||||||
| 0.05 mm | 2.5 | 35 | 20 | 1.5 | |||
| 0,1 ~ 0,19 mm | 3.8 | 43.8 | 12 | ||||
| 0,2 ~ 0,34 mm | 4.4 | 56.3 | 10.4 | ||||
| 0,35 ~ 1,0 mm | 5.0 | 65 | 8.8 | ||||
| 1,1 ~ 2,5 mm | 3.8 | 44.0 | 12 | ||||
| bar | |||||||
| 8-100 mm | 3.1 | 25.0 | 24 | ||||
Bentuk lan ukuran:
| Dikumpulake Rolled Strip | (0.03~0.10)mm x (180~250)mm >(0.10~1.00)mm x(10~250)mm >(1.00~2.50)mm x (100~250)mm |
| Kawat | Φ0.10~Φ6.00mm |
| pita | (4.50~20.0)mm x(50~250)mm |
| Bar/Rod | Φ20.0~Φ100.0mm |
